aFe - Control Front Sway Bar 2020 Toyota Supra 3.0L

Description

aFe Control Front Sway Bar 2020 Toyota Supra 3.0L

The Supra is back! Out of the box, the car does a lot of things well. However, it does exhibit some shortcomings. One thing you notice immediately is the numbness in the steering response near the neutral position. The car feels like it hesitates to change direction. Once the car does take a set in a corner, the short wheelbase does make up for the slow ratio steering, but there is still a driver/car disconnect when initiating a turn. There is also a noticeable amount of body roll. When upgrading to stickier tires, this roll will only get worse. With aFe CONTROL rCs sway bars, you will be able to sharpen steering response and improve initial turn-in. The car will be more agile and feel like a lighter car. Body roll will be dramatically reduced and the 3-way adjustment (front & rear) will allow you to dial in the handling balance that suits your driving style. Whether its stability on the track or more rotation at the autocross, aFe CONTROL sway bars can get you there!

CNC Bent Sway Bars:

Every aFe CONTROL sway bar is CAD designed and CNC bent to strict tolerances. This ensures precise fit and perfect operation.

Adjustable Rates:

The front rCs sway bar is equipped with 3-way adjustment. This allows the driver to dial in the front roll resistance to achieve the desired handling bias. Choose our complete sway bar kit 440-721001-L for full control of your car’s handling balance.

Precision Sway Bar Ends:

The front sway bar utilizes CNC machined ends. These are TIG welded to the bar in a special fixture to ensure accurate hole positioning and consistent manufacturing.

Polyurethane Bushings and Billet Brackets:

aFe Control includes low deflection polyurethane bushings and premium 6061-T6 aluminum black anodized billet brackets with grease fittings.

Emissions Disclaimer:

This product does not require a CARB EO#.

Product Details

• CNC Bent, Lightweight 1026 DOM Steel Tubular Sway Bars
• 29mm (1.125″) Front Sway Bar, 3-Way Adjustment
  • 405 lbs/in (134% Stiffer than Stock)
  • 455 lbs/in (163% Stiffer than Stock)
  • 510 lbs/in (195% Stiffer than Stock)
• CNC Machined Front Sway Bar Ends
• CNC Machined Billet 6061-T6 Aluminum Bushing Brackets with Grease Fittings
• 90A Durometer Polyurethane Bushings
• Durable Blue Powder Coat
• Direct Fit Installation Requires No Modifications
• Made in the USA
• Installation instructions
• Document

Fitment

aFe’s Warranty

For information on aFe’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.